Procedure for handling error code C056E Electronic Control Unit Software

[Doorman]

If you download this document, you will be lost Beer

Procedure for handling error code C056E Electronic Control Unit Software

​

Procedure for handling error code C056E Electronic Control Unit Software after replace EBCM (Electronic Brake Control Module)
Car information: Chevrolet Cruze 2015

Main DTC code:
+ C056E Electronic Control Unit Software
+ System Description: Variant Not Programming
Related DTCs code
+ B1325 : Control Module Power Low Circuit
+ U1040 : Lost Communication with Body Control Module
+ B297B : Driver Door Open Swith Circuit

Step 1: Prepare
+ GM Techline Connect software with dealer access
+ GM MDI1, MDI2 or J2534s passthru interface,....
+ Battery charger connection
+ Prepare good internet
+ EBCM has replaced the correct part number

Step 2: Connect to car by Techline Connect software

Step 3: Replace and PreProgram EBCM by GM SPS2

​

Step 4: Configuration & Setup

​

Step 5: Check DTCs code

​

Step 6: Road Test and Completed

Good Luck!!!​