- If you download this document, you will be lost Beer
HINO DX2 V1.1.18.7
Description: Hino Diagnostic Explorer 2 (Hino DX2) is specialized diagnostic software for trucks and buses branded Hino. The Hino DX2 is used to diagnose electronic control systems such as engine, gearbox, ABS, instrument cluster,… Besides diagnostic features like reading DTCs, Data list, Activation test ,…Type of software: Diagnostic software
Capacity: 110MB
Version: V1.1.18.7
Brand: Hino
Region: All region
Language: Multi language
Computer Requirements:
Operating System: Windows XP /or Windows 7
Microprocessor: 700MHz Pentium Minimum-best if 2.0 GHz or higher
RAM: 128 MB minimum-Recommended 256 MB or higher
Hard Disk: 20GB free space minimum
PC Port: USB
Display: 1024×768 pixel minimum
Internet Browser: Microsoft Internet Explorer 6.0 or higher
Software Feature:
Diagnostic
Reading DTCs (Diagnostic Trouble Codes)
Diagnostic and Troubleshooting workflow
Check and Activation Tests for engine components
Data Monitor function for recording engine/system operation
Customization
Configure user specific features such as
Idle Shutdown
PTO settings
Vehicle/Cruise Speed settings
Engine Protection settings
Maintenance Intervals
Etc...
System Protection data reset
Special Learning for new engine components
Injector Calibration Codes
Supported Hardware:
NexIQ
DPA5
Hino Bowie
Noregon DLA
And some other RP1210 devices
Supported models:
700 series
600 series (Conventional)
500 series
300 series
300 series (N engine; J engine)
300 series (COE) North America
200 series (GD Engine)
Bus/Coach, Heavy
Bus/Coach, Medium
Bus/Coach, Light
Bus
FC Bus
Retro
Industrial Engine
Other
Bus/Coach, Light (Liesse2)
Support diagnosis vehicles with emission standards: EURO2/ EURO3/ EURO4/ EURO5 (With VCS)/ EURO5 (without VCS)/EURO6
